分切機

SLM-A 型電腦自動高速分切機產品介紹Introduction:

1、該型分切機透合于分切光學膜、BOPP、PE、PET等塑料薄膜、紙張、不干皎、薄片，是二次加エ以及彩印包裝企止的理想機型。
2、整機由PLC集中控制(二矢量鬼機)并采用觸摸屏人機界面対整機迸行集中操作。
3、放巻采用迸口氣剎牟控制，由PLC自劫汁算巻徑突現恒張カ控制。
4、牽引控制由一臺矢量変頻申機駆劫，突現恒銭速度控制，并有效地隔斷收放巻張カ之囘的相互影呵。
5、收巻軸采用滑差式收巻釉由一臺矢量変頻屯機軀劫，收巻張カ控制，根據收巻直徑，分切厚度，沒定張力等參數，由PLC造算后輸出控制信號通辻控制收巻軸的摩擦圧カ，來込到控制收卷嵌カ的目的。
6、激光紙管定位裝置。
7、放巻采用液圧式幼カ上下料;無軸氣缸頂套裝置，透合無行年之率囘，可芍省人カ及縮短.上下料吋同。
8、EPC糾編裝置可準硝控制端面精度。
9、系統具有宕功緩沖、停率防松、汁米定氏，定速、巻徑迄算等分切功能。

1. This machine is suitable to slit paper, composit material, aluminium foil, printing film, PE, PP, PET. PVC such plastic film, etc. It is an ideal machine for printing packing company for processing.

2. Entire machine is controlled by PLC(two vector motors), man-machine interface, screen touch operation.

3. Unwind part adopts imported pneumatic brake control, the rolling diameter is automatically calculated by PLC, to achieve constant tension control.

  4. Traction control is drive by a vector variable frequency motor, to achieve constant linear velocity control, And effectively cut off interactant tension between rewind and unwind.
  5. The rewind shaft uses firction, is driven by a vector frequency motor. The rewind tension control is according to rewind diameter, thickness, tension set, etc. After operation by the PLC output controlsignals, via control of the friction pressure, to achieve the purpose of winding tension.
  6. Machine equip with laser mark position device.
  7. Unwind part adopts hydraulic power feed, shaftless, which can save much labour force, and shorten time.
  8. Auto meter presetting, EPC error correction device is positive to assure the accuracy.

9. The feature of machine is stability, security, efficienct, etc.